2 posts • Page 1 of 1
Open AirPort Utility, the application that you used to setup the AirPort ExpressClick Manual SetupClick directly on Wireless Clients (3rd line from the bottom of the page) A list of connected devices with their product ID numbers will be displayed You will need to do a bit of investigative work to associate the Client ID with the products. The best way to do this is to turn off all wireless devices...computers. etc. Then turn one device on and jot down the name of the device and Client ID. Do the same for other devices one at a time. Once you have a list of all of your devices you can check to see which devices are on the network at any given time. Obviously, if you have 4 wireless devices....and you see 5 wireless clients on the network, you may have an unwanted guest.